HERMLE

Hermle Z216-MK Refrigerated Microcentrifuge10 rotor options with capacity up to 44 x 1.5/2.0mlHigh speed, 15,000 rpm/21,631 xgPowerful refrigeration, room temp. to 4°C in <10 minAccepts tubes from 0.2ml to 5mlCompact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of ten available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory.All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges.In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20°C and is designed to reach 4°C (from room temperature) in less than 10 minutes.SpecificationSpeed Range200 to 15,000 rpmMax. RCF21,631 xgMax. Capacity44 x 1.5/2.0 mlTemp. Range-20°C to 40°CDimensions11 x 21.6 x 11.4 in.27.9 x 54.9 x 29 cm.Timerup to 99 hr, 59min and continuousWeight77lbs (35kg)Electrical120V, 60Hz Request A QuoteItem No.DescriptionZ216-MKZ216-MK Refrigerated Microcentrifuge, without rotor, 230V  Z216-2420SNEW! COMBI-rotor with Quick-Seal lid for 24 x 1.5/2.0ml and 4 x PCR Strips (15,000 rpm/ 21,631 xg)Z216-2420Rotor, 24 x 1.5/2.0ml (15,000 rpm/ 21,379 xg)  Z216-2420HRotor, 24 x 1.5/2.0ml with hermetically sealed lid (15,000 rpm/ 21,379 xg)Z216-3020HRotor, 30 x 1.5/2.0ml with hermetically sealed lid (13,500 rpm/ 19,151 xg)Z216-4420Rotor, 44 x 1.5/2.0ml (15,000 rpm/ 21,379 xg)Z216-6005Rotor, 60 x 0.5ml (13,500 rpm/ 16,298 xg)Z216-3202Rotor, 4 x PCR Strips (32 x 0.2ml tubes) (15,000 rpm/ 15,343 xg)Z216-1205Rotor, 12 x 5ml centrifuge tubes (14,500 rpm/ 19,978 xg)Z216-24HEMRotor, hematocrit, 24 x capillary (12,000 rpm/ 14,970 xg)Z216-1220HRotor, 12 x 1.5/2.0ml swing out rotor, 1ml HLA tube compatible (9,000 rpm/ 7,510 xg) 

Hermle Z32 HK Super Speed CentrifugeCompact, Super Speed Centrifuge, up to 38,007 xgAlso accepts a variety of low speed swing out rotorsPowerful RefrigerationThe Z32 HK utilizes much of the technology of our popular Z326 series, with a larger and more powerful motor drive, providing increased speed up to 20,000 rpm (38,007 xg). With 16 available rotor options, the Z32 HK is not only ideal for high speed separations, it would also be classified as a “universal” centrifuge, offering economy angled and swinging bucket rotors for lower speed applications. Tubes from 0.2ml up to 85ml can be accepted, and rotors can quickly be exchanged without any required programming, utilizing the instant rotor identification system.Despite an impressive capacity of up to 4 x 145ml (or 6 x 85ml), the Z32-HK is surprisingly compact. The refrigeration system is conveniently located behind the rotor chamber, resulting in narrow design of less than 16 inches wide. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.SpecificationSpeed Range200 to 20,000 rpmMax. RCF38,007 xgMax. Capacity4 x 145mlTemp. Range-20°C to 40°CDimensions15.7 x 27.5 x 14.1 in.39.9 x 69.9 x 35.8 cm.Timerup to 99 hr, 59min and continuousWeight156 lbs (71 kg)Electrical120V, 60HZ, 1200W Request A QuoteZ032-HKZ32 HK Super Speed Refrigerated Centrifuge, without rotor  Z306-100Swing Out Rotor, Economy, 4 x 145ml, (4,500rpm/3,350xg) accepts 1.5ml up to 145ml tubes, requires inserts (see pdf literature for a full listing)Z326-100HSwing Out Rotor, with hermetically sealed buckets 4 x 100ml, (5,000rpm/3,885xg) accepts 1.5ml up to 100ml tubes, requires inserts (see pdf literature for a full listing)Z326-2420Rotor, 24 x 1.5/2.0ml (17,000rpm/27,460xg)Z326-2420HRotor, 24 x 1.5/2.0ml, Hermetically Sealed (20,000rpm/38,007xg)Z326-3020HRotor, 30 x 1.5/2.0ml, Hermetically Sealed (17,000rpm/30,368xg)Z326-4420Rotor, 44 x 1.5/2.0ml (16,000rpm/24,325xg)Z326-3202Rotor, 4 x PCR Strips (15,000rpm/15,343xg)Z326-2010Rotor, 20 x 10ml (14,000rpm/21,472xg)Z326-1050Rotor, 10 x 50ml conical (9,000rpm/11,770xg)Z326-0650-HSRotor, 6 x 50ml round (16,000rpm/24,039xg)Z326-0485Rotor, 4 x 85ml (15,000rpm/23,140xg)Z326-0685-25Rotor, 6 x 85ml "Super rotor" Fits 85ml, 50ml, 15ml, and 7ml(13,000rpm/21,726xg)Z326-1215Rotor, 12 x 15ml (6,000rpm/4,427xg)Z326-3015Rotor, 30 x 15ml (4,500rpm/2,830xg)Z326-0650-LSRotor, 6 x 50ml (6,000rpm/4,427xg)Z326-02MPSwing Out Rotor, 2 x 3 microplates (4,500rpm/2,716xg)Z326-MPCANEW! Universal, 3 place chamber slide and 35/60mm dish adapter for microplate carriers 2/pk For a Complete list of accessories, please see the product literature. 

Hermle Z36 HK Super Speed CentrifugeBenchtop design, with the speed/power of a floor modelSuper-Speed capability, up to 65,395 xgWide variety of high speed rotor optionsThe Z36 HK is the result of many years of experience in the design of universal centrifuges, high speed centrifuges and compact microcentrifuges. The result is a “Super-Speed” centrifuge with unmatched performance among benchtop centrifuges. A robust motor drive powers a variety of high speed angled rotors to speeds that would generally only be achievable in large, floor-standing ultra centirfuges. 2.0ml microtube samples can reach forces above 65,000xg, while 50ml samples, as high as 41,410xg.In addition to its high speed capabilities, the Z36 HK doubles as a universal centrifuge with a 4 x 250ml swing out rotor (offering inserts for all common tube sizes) as well as a 2 x 3 position swing-out microplate rotor. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.SpecificationSpeed Range200 to 30,000 rpmMax. RCF65,395 xgMax. Capacity6 x 250mlTemp. Range-20°C to 40°CDimensions28.1 x 20 x 16.5 in.71.4 x 50.8 x 42 cm.Timerup to 99 hr, 59min and continuousWeight200 lbs (91 kg)Electrical120V, 60HZ, 1800W Request A Quote Item No.DescriptionZ036-HKZ36-HK Super Speed Refrigerated Centrifuge without rotor  Z366-250-36Swing Out Rotor, 4 x 250ml, (4,000rpm/2,987xg) accepts 5/7ml to 250ml tubes, requires inserts (see pdf literature for a full listing)Z326-1220-36Rotor, 12 x 1.5/2.0ml (30,000rpm/65,395xg)Z326-3020H-36Rotor, 30 x 1.5/2.0ml Hermetically Sealed (20,000rpm/42,032xg)Z326-2010-36Rotor, 20 x 10ml (16,000rpm/28,045xg)Z326-1050-3610 x 50ml conical (10,500/16,020 xg)Z326-0650-HS-36Rotor, 6 x 50ml round (21,00rpm/41,410xg)Z326-0485-36Rotor, 4 x 85ml (20,000rpm/41,137xg)Z326-0685-36Rotor, 6 x 85ml (13,000rpm/21,726xg)Z366-06250-36Rotor, 6 x 250ml (10,000rpm/15,650xg)Z326-3015-36Rotor, 30 x 15ml (4,500rpm/2,830xg)Z326-02MP-36Swing Out Rotor, 2 x 3 Microplates (4,500rpm/2,716xg)Z326-MPCANEW! Universal, 3 place chamber slide and 35/60mm dish adapter for microplate carriers 2/pk For a Complete list of accessories, please see the product literature.

Hermle MC-12 High Speed Microcentrifuge12 tube capacity / Up to 16,100 xgLess than 9 in. wideQuick decelerationWhisper quiet operationBenchmark’s MC-12 is the first and only compact microcentrifuge capable of achieving centrifugal speeds up to the critical threshold of 16,000 xg, often held as the standard for many molecular biology/DNA protocols. Its’ brushless, maintenance free drive system makes it powerful, yet compact enough to allow each work station to be fully equipped with a personal centrifuge.The MC-12 defines a new class of microcentrifuge: compact, quick, powerful and affordable. All aspects of microcentrifuge performance were taken into consideration and no compromises were made. In addition to its unsurpassed speed, the MC-12 also delivers shortened acceleration/deceleration times, whisper quiet operation and its computer-designed airflow pattern minimizes sample temperature increases during longer runs at high speeds.All operating parameters are set using a single, conveniently located control knob and the large, bright LCD provides a clear indication of time and rpm or g-force. A separate momentary spin button permits instant spin downs, without setting or disturbing any preset parameters. The aircraft grade aluminum rotor accepts 1.5 to 2.0ml tubes directly, as well as 0.5ml and 0.2ml tubes with optional adapters. For applications requiring sub-ambient temperatures, the MC-12 is cold room safe.SpecificationSpeed500 to 15,500 rpm(up to 16,100 xg)Capacity12 x 1.5/2.0mlAcceleration10 secondsDeceleration12 secondsSpeed increment100 rpm or 100 rcfTimer20 sec. to 99min. / cont.MomentaryYesDimensions(W x D x H)8.7 x 10.6 x 5.9 in.(22 x 27 x 15 cm)Weight10.5 lbs / 4.8 kgElectrical115V or 230V. 50-60 Hz, 100WWarranty2 Years Request A QuoteItemDescriptionC1612*MC-12 High Speed Microcentrifuge with 12 position rotorC1008-A5-6Optional adapter pack, 0.5ml, 6/pkC1008-A2-6Optional adapters pack, 0.2ml, 6/pk 

Hermle Z306 - Universal CentrifugeFeaturesMulti-Purpose, one compact centrifuge that accepts:Swing out rotors (12 x 15ml or 8 x 50ml)High Speed microtube rotors (up to 18,624xg)Low-Medium speed fixed angle rotors for 15ml to 50mlThe Z306 is a compact and economical centrifuge with a series of rotor options making it well suited for clinical, industrial, and research laboratories. Despite the impressive capacity of the 4 x 145ml rotor (capable of supporting 8 x 50ml or 12 x 15ml with the use of rotor inserts), the Z306 is surprisingly compact with a footprint of just over 14 x 18 inches. An optional rotor is also available for microplates (2 x 3 microplates), positioning this model as one of the smallest, and least expensive centrifuges capable of high speed microplate centrifugation.Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. SpecificationSpeed Range 200 to 14,000 rpmMax. RCF 18,624 xgMax. Capacity 4 x 145 mlDimensions 13.9 x 18.6 x 13 in.(35.3 x 47.2 x 33 cm.)Timer up to 99 hr, 59min and continuousWeight 66 lbs (30 kg)Electrical 120V, 60HZ, 240W AccessoriesZ306Z306 Universal Centrifuge, without rotor  Z306-100Swing Out Rotor, Economy, 4 x 145ml, (4,500rpm/3,350xg) accepts 1.5ml up to 145ml tubes, requires inserts (see pdf literature for a full listing)Z326-100HSwing Out Rotor, with hermetically sealed buckets 4 x 100ml, (4,000rpm/2,486xg) accepts 1.5ml up to 100ml tubes, requires inserts (see pdf literature for a full listing)Z326-100H-ACSwing Out Rotor, without buckets 4 x 100ml, (4,000rpm/2,486xg) accepts 1.5ml up to 100ml tubes, requires inserts (see pdf literature for a full listing)Z326-02MPSwing Out Rotor, 2 x 3 Microplates (4,500 rpm/ 2,716 xg)Z326-MPCANEW! Universal, 3 place chamber slide and 35/60mm dish adapter for microplate carriers 2/pkZ326-2420Rotor, 24 x 1.5/2.0ml (14,000rpm/18,624xg)Z326-2420HRotor, 24 x 1.5/2.0ml, Hermetically sealed (14,000rpm/18,624xg)Z326-3020HRotor, 30 x 1.5/2.0ml Hermetically sealed (12,000rpm/15,131xg)Z326-1215Rotor, 12 x 15ml (6,000rpm/4,427xg)Z326-3015Rotor, 30 x 15ml (4,500rpm/2,830xg)Z326-0650-LSRotor, 6 x 50ml (6,000rpm/4,427xg) For a Complete list of accessories, please see the product literature.

Hermle Z326 - Series Universal CentrifugesExtremely versatile, 17 rotor optionsAdvanced programming with automatic rotor recognitionAvailable with refrigeration12 x 15ml and 8 x 50ml swing out capacityWith 17 available rotor options, the Z326 series defines the term “universal”. Swinging bucket rotors and high speed angled rotors are available to accept tubes from 0.2ml up to 85ml, making the Z326 series suitable for nearly any laboratory application. Despite an impressive capacity of up to 4 x 145ml (or 6 x 85ml), the Z326 is surprisingly compact with both the standard air-cooled model and refrigerated model featuring a width of just over 15 inches.Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. SpecificationSpeed Range 200 to 18,000 rpmMax. RCF 23,542 xgMax. Capacity 4 x 145mlDimensions 15.8 x 18.9 x 14.1 in.(40 x 48 x 35.8 cm.)15.8 x 27.5 x 14 in. (-K)(40 x 70 x 35.8 cm.)Timer up to 99 hr, 59min and continuousTemp. Range -20°C to 40°C (-K)Weight 94.6 lbs / 132 lbs (-K)Electrical 120V, 60HZPower (Watts) 455W / 600W AccessoriesZ326Z326 Universal Centrifuge, without rotorZ326-KZ326 Universal Centrifuge, Refrigerated, without rotor  Z306-100Swing Out Rotor, Economy, 4 x 145ml, (4,500rpm/3,350xg) accepts 1.5ml up to 145ml tubes, requires inserts (see pdf literature for a full listing)Z326-100HSwing Out Rotor, with hermetically sealed buckets 4 x 100ml, (5,000rpm/3,885xg) accepts 1.5ml up to 100ml tubes, requires inserts (see pdf literature for a full listing)Z326-100H-ACSwing Out Rotor, without buckets 4 x 100ml, (5,000rpm/3,885xg) accepts 1.5ml up to 100ml tubes, requires inserts (see pdf literature for a full listing)Z326-02MPSwing Out Rotor, 2 x 3 Microplates (4,500rpm/2,716xg)Z326-MPCANEW! Universal, 3 place chamber slide and 35/60mm dish adapter for microplate carriers 2/pkZ326-1220HRotor, 12 x 1.5/2.0ml (18,000rpm/23,542xg)Z326-2420Rotor, 24 x 1.5/2.0ml (Z326: 14,000rpm/18,624xg) (-K: 15,000rpm/21,379xg)Z326-2420HRotor, 24 x 1.5/2.0ml, Hermetically Sealed (Z326: 14,000rpm/18,624xg) (-K: 15,000rpm/21,379xg)Z326-3020HRotor, 30 x 1.5/2.0ml Hermetically Sealed (Z326: 13,000rpm/17,758xg) (-K: 14,000rpm/20,505xg)Z326-4420Rotor, 44 x 1.5/2.0ml (Z326: 15,000rpm/21,379xg)Z326-6405Rotor, 64 x 0.5ml (13,500rpm/16,298xg)Z326-3202Rotor, 4 x PCR strips (15,000rpm/15,343xg)Z326-1205Rotor, 12 x 5ml (Z326: 14,000rpm/18,624xg) (-K: 15,000rpm/21,379xg)Z326-1215Rotor, 12 x 15ml (6,000rpm/4,427xg)Z326-3015Rotor, 30 x 15ml (4,500rpm/2,830xg)Z326-0650-LSRotor, 6 x 50ml (6,000rpm/4,427xg)Z326-0685-25Rotor, 6 x 85ml "Super rotor" Fits 85ml, 50ml, 15ml, and 7ml (Z326: 11,000rpm/13,932xg) (-K: 13,5000rpm/20,984xg)Z326-0650-HSRotor, 6 x 50ml round tube (12,000rpm/13,522xg)Z326-1050Rotor, 10 x 50ml conical (7,500rpm/8,174xg)Z326-2010Rotor, 12 x 10ml (12,000rpm/15,775xg) For a Complete list of accessories, please see the product literature. 

Hermle Z366 Series - 4 x 250ml Capacity Centrifuge4 x 250ml swing out rotor capacity,up to 16 x 50ml and 40 x 15mlAdvanced programming with auto-rotor recognitionOptional high speed rotors, providing up to 24,000 xgAvailable with refrigerationFor applications requiring increased capacity over the Z306 or Z326 series centrifuges, the Z366 series offer a unique “Mid-Range” swing out rotor that accepts a variety of different tubes, including up to 16 x 50ml or 40 x 15ml. Despite this step up in capacity, the Z366 maintains a surprisingly compact design, with the standard air-cooled model featuring a footprint of 17 x 20 inches.In addition to the popular 4 x 250ml swing out rotor, a variety of additional rotors are also available. Angled rotors range from a 24 x 1.5ml micro rotor to a high capacity 6 x 250ml rotor.A 2 x 3 microplate rotor is also available, as well as a 4 x PCR strips (8-strips) rotor.Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.SpecificationSpeed 200 to 16,000 rpmMax RCF 24,325 xgMax Capacity 4 x 250mlTemp. Range -20°C to 40°C (-K only)Dimensions 17 x 20 x 14.2 in.(43 x 51 x 36 cm.)28.3 x 20 x 14.2 in. (-K)(71.9 x 51 x 36 cm.)Timer up to 99 hr, 59min and continuousWeight 114 lbs/169 lbs (-K)Electrical 120V, 60HzWattage 520W/ 785W (-K) AccessoriesZ366Z366 Universal Centrifuge, without rotorZ366-KZ366-K Refrigerated Universal Centrifuge, without rotor  Z366-2504 x 250ml Swing-out Rotor, (4,500rpm/3,780xg) accepts 5/7ml to 250ml tubes, requires inserts (see pdf literature for a full listing)Z366-250-HC4 x 250ml High-Capacity Swing-out Rotor, (4,500rpm/3,735xg) accepts 5/7ml to 50ml tubes, requires inserts (see pdf literature for a full listing)Z366-06250Rotor, 6 x 250ml bottle (8,000rpm/10,016xg)Z326-0685Rotor, 6 x 85ml (Z366: 11,000rpm/15,555xg) (-K: 13,000rpm/21,726xg)Z326-0650-HSRotor, 6 x 50ml round tube (13,00rpm/15,869xg)Z326-1050Rotor, 10 x 50ml conical (Z366: 10,000rpm/14,532xg) (-K: 10,500/16,022xg)Z326-1020Rotor, 20 x 10ml (12,000rpm/15,775xg)Z326-2420Rotor, 24 x 1.5/2.0ml (Z366: 15,000rpm/21,379xg) (-K: 16,000rpm/24,325xg)Z326-2420HRotor, 24 x 1.5/2.0ml Hermetically Sealed (Z366: 15,000rpm/21,379xg) (-K: 16,000rpm/24,325xg)Z326-4420Rotor, 44 x 1.5/2.0ml (Z366: 15,000rpm/21,379xg) (-K: 16,000rpm/24,325xg)Z326-3015Rotor, 30 x 15ml (4,500rpm/2,830xg)Z326-02MPRotor, 2 x 3 Microplates (4,500rpm/2,716xg)Z326-MPCANEW! Universal, 3 place chamber slide and 35/60mm dish adapter for microplate carriers 2/pk 

Hermle Z446 Series - 4 x 750ml High Capacity CentrifugeHIGH CAPACITY 4 x 750ml swing out rotor,– Up to 68 x 15ml or 28 x 50mlIdeal for Tissue Culture applicationsAdvanced programming with automatic rotor recognitionAvailable with refrigerationThe Z446 universal centrifuge series offers the highest capacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 xg with full loads of up to 28 x 50ml, 68 x 15ml tubes, and up to 20 x microplates.Advanced microprocessor controls allow for instant rotor identification,which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display.SpecificationSpeed Range 200 to 16,000 rpmMax. RCF 24,325 xgMax. Capacity 4 x 750mlTemp. Range -20°C to 40°C (Z446-K only)Dimensions 21.3 x 26.4 x 15.4 in.(54.1 x 67 x 39.1 cm.)28.7 x 26.4 x 15.4 in. (-K)(72.9 x 67 x 39.1 cm.)Timer up to 99 hr, 59min and continuousWeight 174 lbs / 244 lbs (-K)Electrical 115V, 60HzPower (Watts) 600W / 1630W (-K) AccessoriesZ446Z446 High Capacity Centrifuge, without rotorZ446-KZ446-K High Capacity Centrifuge, Refrigerated, without rotor  Z446-750Swing Out Rotor, 4 x 750ml, (Z446: 4,000rpm/3,434xg) (-K: 4,500rpm/4,346xg) accepts 5/7ml up to 750ml tubes, requires inserts (see pdf literature for a full listing)Z446-750-MPMicroplate carrier for Z446-750-AC 2/pkZ446-MP-BUKSealable microplate bucket for Z446-750-AC 2/pkZ446-04500Rotor, 4 x 500ml bottle (8,000rpm/10,367xg)Z366-06250Rotor, 6 x 250ml bottle (8,000rpm/10,016xg)Z326-0685Rotor, 6 x 85ml (Z446: 11,000rpm/15,555xg) (-K: 13,000rpm/21,726xg)Z326-0485Rotor, 4 x 85ml (Z446: 15,000rpm/23,140xg) (-K: 16,000rpm/26,328xg)Z326-0650-HSRotor, 6 x 50ml round tube (13,000rpm/15,869xg)Z326-1050Rotor, 10 x 50ml conical (Z446: 10,000rpm/14,532xg) (-K: 10,500/16,022xg)Z326-1020Rotor, 20 x 10ml (12,000rpm/15,775xg)Z326-2420Rotor, 24 x 1.5/2.0ml (16,000rpm/24,325xg)Z326-2420HRotor, 24 x 1.5/2.0ml Hermetically Sealed (16,000rpm/24,325xg)Z326-4420Rotor, 44 x 1.5/2.0ml (16,000rpm/24,325xg)Z326-3202Rotor, 4 x PCR Strips (15,000rpm/15,343xg)Z326-02MPRotor, 2 x 3 Microplates (4,500rpm/2,716xg)Z326-MPCANEW! Universal, 3 place chamber slide and 35/60mm dish adapter for microplate carriers 2/pkZ446-MP-STKPCR Stacking adapter 2/pk (For Z446-750-MP only) For a Complete list of accessories, please see the product literature. 

Hermle Z496-K Ultra High Capacity Floor Standing CentrifugeULTRA HIGH CAPACITY,(4 x 1000ml, 98 x 15ml or 40 x 50ml)Accepts 500ml or 750ml blood bagsTwo modelsFloor-standing, with storage drawerUnderbench (27.5″ height for use under the bench)The Z496-K centrifuges offer the highest tube/bottle capacity in our line.Several rotors are available, including a popular 4 position swinging bucket rotor with a wide offering of accessories for the centrifugation of tubes, bottles, plates and blood bags. The high capacity rectangular buckets accept microplates directly or a variety of tube inserts foraccomodating as many as 40 x 50ml conical or 96 x 15ml conical tubes per run.Advanced microprocessor controls allow for instant rotor identification,which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving up to 99 saved programs, the easy to use front panel can adjust accel/decel rates, time, and convert operation between rpm and rcf. The powerful refrigeration system, with a range of -20° to 40° C, also features a precool function that ensures the temperature of the chamber is optimized for any application.A standard floor stadning model is available (height: 38.6 in.) which includes a convenient lower drawer for te storage of frequently used rotors and accessories. In addition, a space saving “underbench” model (height: 27.5 in.) is available when under the counter storage is preferred. Both models are equipped with wheels for easy maneuverability around the laboratory.For all your high capacity, high volume needs, the Z496-K floor standing series is the perfect centrifuge.SpecificationSpeed Range 10,500 rpmMax. RCF 16,022 xgMax. Capacity 4 x 1000mlTemp. Range -20° to 40°CDimensions Underbench24 x 27 x 27.5 in.(62 x 69 x 70 cm.)Floor Standing24 x 27 x 38.6 in.(62 x 69 x 98 cm.)Timer up to 99 hr, 59min and continuousWeight Underbench - 346lbs / 157kgFloor Standing - 419lbs / 190kgElectrical 230V, 50-60 HzPower (Watts) 2300 W Related ProductZ496-KZK 496 Floor standing modelZ496-K-UCZK 496 Underbench model  Z496-1000Swing out rotor, 4 x 1000ml with rectangular buckets (4,200rpm/3,964 xg), requires inserts (see pdf literature for a full listing)Z496-1000-ACSwing out rotor, 4 x 1000ml without buckets, requires inserts (see pdf literature for a full listing)Z496-1000-RBUKRectangular buckets for ZK-1000-AC rotor, 2/pk (4,200rpm/3,964 xg)Z326-MPCANEW! Universal, 3 place chamber slide and 35/60mm dish adapter for microplate carriers 2/pkZ496-1000-1L1000ml bucket for ZK-1000-AC rotor, 2/pk (4,600rpm/5,203xg)Z496-500-BLD500ml blood bag buckets for ZK-1000-AC rotor, 2/pk (4,600rpm/5,298xg)Z496-750-BLD750ml blood bag buckets for ZK-1000-AC rotor, 2/pk (4,600rpm/5,274xg)Z496-1000-MPRAMicroplate removing aidZ446-04500Rotor, 4 x 500ml (8,000rpm/10,367xg)Z366-06250Rotor, 6 x 250ml (8,000rpm/10,016xg)Z326-1050Rotor, 10 x 50ml (10,500rpm/16,022xg) 

Hermle Z600 - OLEUM Oil Testing CentrifugeASTM compliant for petroleum testingSwing out rotor for pear shaped or conical ASTM tubesLCD display, control speed in rpm or rcfThe OLEUM Oil-Testing Centrifuge is our stand alone oil testing centrifuge for pear shaped or conical ASTM oil testing tubes. A 4-place swing out rotor reaches up to 3,000rpm, or 2,213 xg to determine the water content of your oil sample.The OLEUM is equipped with a maintenance-free induction motor, stainless steel chamber, motor driven lid lock, and active imbalance detection and shutdown. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.SpecificationSpeed Range 200 to 3,000 rpmMax. RCF 2,216 xgMax. Capacity 4 x 100ml (conical or pear shaped ASTM tubes)Dimensions 22 x 25 x 16 in.(56 x 64 x 41 cm.)Timer up to 99 hr, 59 min and continuousWeight 159 lbsElectrical 120 or 230V, 50/60HZPower (Watts) 950W Related ProductZ600-OLOLEUM Oil-Testing Centrifuge  Z600-OL-COMOLEUM Rotor package, complete with rotor, buckets and insertsZ600-OL-CTCCushion for conical oil test tube, 2/pkZ600-OL-PTCCushion for pear shaped oil test tube, 2/pkZ600-OL-BUKSpare round buckets for Z0-ROT-COM, 2/pkZ600-OL-INSSpare inserts for Z0-BUK, 2/pk