HONEYWELL BW

Honeywell BW Solo - Single Gas DetectorHoneywell BW™ Solo is a easy to service single-gas detector with BLE connectivity that provides real-time visibility into the status and safety of hazardous-area workers, helping companies respond faster, more knowingly and decisively to safety incidents.• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards.• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell Safety Suite Device Configurator software Quick SpecsHigh standards of sensor quality and reliabilityThe easiest single-gas detector to serviceThe first single-gas detector with the 1 Series sensor for CO, H2S and O2Complete with an extensive selection of sensor optionsCompatible with IntelliDoXSPECIFICATIONSize:2.7 x 2.6 x 1.4 in. / 7.0 x 6.7x 3.6 cm (1-Series sensor models) 2.7 x 2.6 x 1.6 in. / 7.0 x 6.7x 4.1 cm (4-Series sensor models)Weight:3.6 to 4.1 oz. / 103 to 116 g, depending on installed sensorHumidity:5% - 95% RH (non-condensing)Ingress Protection:IP66/68Alarms & Type:Visual, vibrating, audible (95 dB); Low, High, TWA, STEL, non-complianceSelf Test:Sensor integrity, circuitry, battery and audible/visual alarms on activation; battery (continuous)Typical Battery Life:12 months (6 months for 1-Series O2)Connected Worker:• Bluetooth™ Low Energy (BLE) – Ability to connect to Honeywell’s Safety Communicator AppUser Options:Reset TWA, STEL and Peak readings • Change High, Low, TWA and STEL alarm setpoints • Latching alarms • Enable IntelliFlash and non-compliance indicators • Set calibration and/or bump test reminders • Assign worker and location assignments • LanguageCertifications & Approvals:SA: Class I, Division 1, Groups A, B, C, D T4 Class I, Zone 0, AEx/Ex ia IIC T4 Ga -40°C≤ Tamb ≤ 60°C ATEX: Sira 19ATEX2004 X 0518 g II 1G Ex ia IIC T4 Ga -40°C≤ Tamb ≤ 60°C g I M1 Ex ia I Ma -40°C≤ Tamb ≤ 60°C IECEx: IECEx SIR 19.0004 Ex ia IIC T4 GWarranty:3 years for 1-Series sensors and 1-Series detectors (excluding battery) 2 years for 4-Series sensors and 4-Series detectors (excluding battery) 1 year for H2, NH3, Cl2, O3, ClO2 sensors

BW Gas Alert Extreme - Single Gas Detector - NOFeatures & BenefitsEquipped with internal vibrating alarm for high noise areasSecure and accurate history with datalogging optionMulti-language support in English, French, German, Spanish, and PortugueseSpecificationsSize:1.1 x 2.0 x 3.75 in./ 2.8 x 5.0 x 9.5 cmWeight:2.9 oz./ 82 gAlarms: visual, vibrating, audible (95dB)- Low, High, TWA and STELTests: Sensor integrity, circuitry, battery and audible/visual alarms on activation, battery (continuous)Pump: Compatible with the Sampler motorized pumpTypical battery life:1.5 year battery life (typical) with replaceable 3V batteryStandard features of BW products:• Continuous LCD shows real-time gas concentrations• Compact and lightweight design makes it comfortable to wear• Water-resistant• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up• Bright wide-angled visual alarm bars• Built-in concussion-proof boot

BW Honeywell Gas Alert Microclip XLThis unit has been Gas Monitor Points primary multi gas monitor for the past few years due to its small design and one button operation giving the user an easy to use monitor offering personal multi gas warning in confined spaces and other hazardous areas.The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW’s MicroDock II automatic test and calibration system and Fleet Manager II software.Combustible %LEL, Oxygen (O2), Carbon Monoxide (C0), Hydrogen Sulfide (H2S)There are also a wide range of accessories available for this unit from Gas Monitor Point which can be found on our accessories and spares section.Features & BenefitsEasy and comfortable to wear; thin and lightweightEasy operation and straightforward use and training with one-button simplicityEasy visual compliance with flashing, green IntelliFlash™Easy and cost effective to ownStandard features of BW multi-gas products:• Continuous LCD shows real-time gas concentrations• Compact and lightweight design makes it comfortable to wear• Water-resistant• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up• Bright wide-angled visual alarm bars• Built-in concussion-proof boot

Honeywell BW GasAlert Max XT II 4-Gas Detector with Built-In PumpThe GasAlert MAX XT II simultaneously monitors and displays up to four potential atmospheric hazards including oxygen, combustibles/LEL, CO and H2S..Easy operation with one-button simplicityIntegrated sampling pump with reliable diaphragm technolog designed with SmartSample technology to prevent moisture from entering pump and save time with reliable pump block detectionLow, High STEL (short-term exposure limit), TWA (time-weighted average), and OL (over limit) alarmsBuilt-in rechargeable lithium batteryVisual, audible and vibrating alarmsEquipped with standard datalogging and event loggingRugged and durable with built-in concussion-proof bootMulti-language support in English, French, German, Spanish and PortugueseMicroDock II compatible for easy calibration, test and record storageConveniently manage your detector with Fleet Manager II softwareGasAlert MAX XT II SpecificationsSize5.1 x 2.8 x 2.0 in. / 13.1 x 7.0 x 5.2 cmWeight11.5 oz. / 328 gCertification and ApprovalsUL: Class I, Division 1, Groups A,B,C,DIECEx: Ga Exia IICT4ATEX: CE Ex II 1 Ga EX ia IIC T4,BR-EXIA IIC T4See literature for latest certificationsEnvironmental RatingsNormal Operating: -4° to 122° F (-20° to 50° C) Humidity: 10% to 100% non-condensingAlarmsLow, High, STEL, TWA, OL (over limit), Low Battery, PumpAudible AlarmsMulti-tone rated at 95 dBA at one foot (30cm)Vibrating AlarmStandardPumpInternal Sample from up to 66 ft / 20mDataloggerDatalogger capable of 1 year of continuous data with user configurable intervalsBattery13 hours @ 32°F / 0°C8 hours @ -4°F / -20°C Recharges in 6 hoursBattery Life/ Run TimeAlkaline:         20 hours at 68 °F (20°C)Rechargeable: 20 hours at 68 °F (20°C)SensorsO2, LEL, CO, H2S,WarrantyFull 2 year warranty including sensorsUser OptionsConfidence/ compliance beepConfidence beep Safety (sensor) lockLatching alarmsSafe display mode CCalibration IR lockLocation selectionForce block testForce bump test when overdueForce calibration when overdueSensor conigurationDetector identificationLow alarm acknowledgeLanguage choices (five)Set custom start-up messageConfidence intervalDatalog interval 

Honeywell BW GasAlertMicroClip XL and X3 4-Gas Detectors with 2 or 5-Year O2 SensorsThe GasAlertMicroClip XL and X3 simultaneously monitor and display up to four potential atmospheric hazards including oxygen, combustibles/LEL, CO and H2S.  GasAlertMicroClip XL for standard operation with 2-year warranty  GasAlertMicroClip X3 with new 5-year O2 sensor with 3-year warranty  NEW! IP68 rating - unmatched water protection  Compact, lightweight and easy to use - with one-button operation  Guaranteed runtime for at least a 12-hour shift — down to -20°C          without compromising LEL detection of hydrogen, acetylene          and other combustible gases   Rechargeable battery - survives harsh temperatures  Flashing green IntelliFlash™ light for compliance at a glance  Reflex™ Technology ensures sensor responsiveness for safety,        uptime and worker confidence   Multi-language support in English, French, German, Spanish        and Portuguese  MicroDock II compatible for easy calibration, test and record storage   Conveniently manage your detector with Fleet Manager II softwareGasAlertMicroClip XL and X3SpecificationsSize4.4 x 2.4 x 1.2 in. / 11.3 x 6.0 x 3.2 cmWeight6.7 oz. / 190 gCertification and ApprovalsUL: Class I, Division 1, Groups A,B,C,DATEX: CE Ex II 1 GCE European ConformitySee literature for latest certificationEnvironmental RatingsNormal Operating: -4° to 122° F (-20° to 50° C)Humidity: 0% to 95% non-condensingAlarmsVisual, vibrating, audible (95 dB) * Low, High, STEL, OL (over limit)TestsAudible/visual alarms on activation; sensors, battery and circuitry (continuous)TypicalBattery Life18 hours; recharges in less than 6 hoursNote: Approximately 20% capacity loss is normal with lithium polymer batteries after 500 charge cycles. Refer to the Operator's Manual for additional information.SensorsO2, LEL, CO, H2SWarrantyXL: Full 2 year warranty including sensorsX3: Full 3year warranty including sensorsUser OptionsConfidence/ compliance beepSet STEL IntervalSensor On/OffLatching alarmsSafe display modeStealth modeCalibration LockAuto zero on start-upO2 auto calibration on start upSet bump test intervalForce bump test when overdueIntelliFlash intervalCombustible gas measurement (%LEL or % by volume methane)User-settable calibration gas levelForce calibration when overdueLow alarm acknowledgeLanguage choices (five)Set custom start-up message GasAlertMicroClip XL and X3ConfigurationsSensorsMicroClip XLMicroClip X3%LEL, O2, H2S, COMCXL-XWHM-Y-NAMCX3-XWHM-Y-NA%LEL, O2, H2SMCXL-XWH0-Y-NAMCX3-XWH0-Y-NA%LEL, O2, COMCXL-XW0M-Y-NAMCX3-XW0M-Y-NAO2, H2S, COMCXL-X0HM-Y-NAMCX3-X0HM-Y-NA%LEL, O2MCXL-XW00-Y-NAMCX3-XW00-Y-NAH2S, COMCXL-00HM-Y-NAMCX3-00HM-Y-NAO2, H2SMCXL-X0H0-Y-NAMCX3-X0H0-Y-NAO2, COMCXL-X00M-Y-NAMCX3-X00M-Y-NAO2MCXL-X000-Y-NAMCX3-X000-Y-NAH2SMCXL-00H0-Y-NAMCX3-00H0-Y-NACOMCXL-000M-Y-NAMCX3-000M-Y-NADetectors ship with sensors (user specified), stainless-steel alligator-style clip, rechargeable battery, wall outlet charging adapter, calibration/test cap with tubing, manual & multi-language CD manual.For Black Housing Change the "Y" in the part number to "B" 

Honeywell BW  GasAlert Micro 5-Gas DetectorThe GasAlert Micro 5 simultaneously monitors and displays up to five potential atmospheric hazards including oxygen, combustibles and a range of toxic gases.Measure up to five atmospheric hazards concurrentlyDisplays real-time gas concentrations readings for up to four gas hazards including hydrogen sulfide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (%LEL & % by volume)Audible, visual vibrating alarms alert users to unsafe conditions while downloadable datalogging provides exposure reporting.Rapidly switch from diffusion to pump mode in the fieldFully customizable to suit any application with wide range of user optionsTwo power options: AA alkaline or rechargeable hot-swappable battery packsDust and water resistant design with IP 65/67 ratingRugged and durable, with a built-in concussion-proof bootVisual, audible and vibrating alarmsMulti-language support in English, French, German, Spanish and PortugueseAutomatic calibration procedure; compatible with BW MicroDock II automatic test and calibration stationGasAlert Micro5 SpecificationsSize5.7 x 2.9 x 1.5 in. / 14.5 x 7.4 x 3.8 cmWeight13.1 oz. / 370 gCertification and ApprovalsUL: Class I, Division 1, Groups A,B,C,DAmerican Bureau of Shipping - Toxic& PID modelsCE Ex II 1 G,CE Ex II 2 G - IR model onlyCA EX ia IIC T4UIECEx: Ga Ex ia IIC T4BR-EXIA IIC T4See literature for latest certifications.\Environmental RatingsNormal Operating: -4° to 122° F (-20° to 50° C) Humidity: 10% to 100% non-condensingAlarmsHigh, Low, TWA, STEL, OL (over limit)Audible AlarmsMulti-tone rated at 95 dBA at one foot (30cm)Vibrating AlarmStandardPumpOptional, Sample from up to 66 ft / 20mDataloggerDatalogger capable of 1 year of continuous data with user configurable intervalsIQ Management SystemFully compatible. Supports alarm event e-mail, person and location assignment functions. Able to be docked with or without pump attached.BatteryAlkaline: (3) AA Disposable BatteriesRechargeable: Li-Po (Lithium Polymer) battery packBattery Life/ Run TimeAlkaline:         20 hours at 68 °F (20°C)Rechargeable: 20 hours at 68 °F (20°C)SensorsO2, LEL, CO, H2S, SO2, PH3, NH3, NO2, HCN, Cl2,ClO2, O3PID Model: PID for volatile organic compound (VOC) monitoring, H2S, CO, O2, SO2, PH3, NH3, NO2, HCN, Cl2, ClO2, and LEL.IR Model: CO2 IR sensor, H2S, CO,O2, SO2, NH3, O2 & LELWarrantyWith exceptionsFull 2 year warranty including sensors Note: 1 year warranty only on NH3, Cl2, ClO3, O3 and PID Lamp.User OptionsConfidence/ compliance beepSet STEL intervalSet TWA intervalSensor on/offLatching alarmsSafe display modeStealth display modeAdjust clockSet datalogger ratePasscode protectionCorrection Factor Libraty (LED/PID)Fast pumpCombustible gas measurement (% LEL or % by volume methane)O2 auto calibration on start-upForce CalibrationForce bumpAuto-zero on start-upAutomatic backlightSleep modeUser-definable calibration gas concentrationLanguage choices (5)e

Honeywell BW  GasAlert Quattro  4-Gas DetectorThe GasAlertQuattro displays real-time gas concentrations readings for up to four gas hazards including hydrogen sulfide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (%LEL & % by volume). Audible, visual & vibrating alarms alert users to unsafe conditions while downloadable datalogging provides exposure reporting.The GasAlertQuattro features IntelliFlash, a green LED confidence flash that verifies normal operation to both the user and supervisors from up to 20 ft. / 6.10 m.With easy to identify bump test & calibration icons and power options that outlast normal shifts - 20 hours with rechargeable batteries and 14 hours with alkaline batteries..One-button operational simplicityIntelliFlash verifies operation and compliance to both the user and supervisors from up to 20 ft. / 6.1 m • Field-proven Surecell sensors offer an unprecedented performance in even the harshest environmentsEasy to identify icons for onsite auditing and complianceFlexible, interchangeable battery options with extended runtimes - rechargeable battery pack or 3 AA batteriesExtensive datalogging and event logging capabilityUser-options, such as flip display, accessible through IR interface for tamper-proof operationVisual, audible and vibrating alarmsMulti-language support in English, French, German, Spanish and PortugueseMicroDock II compatible for easy calibration, test and record storageSpecificationsSize5.1" x 3.2" x 1.9" (13 x 8.1 x 4.7cm)Weight11.15 oz (316g) with rechargeable battery pack11.92 oz (338g) with alkaline battery packCertification and ApprovalsRatingsUL: Class I, Division 1, Groups A,B,C,DATEX: CE Ex ia llC T4UIECEx: Ga Ex ia IIC T4BR-EXIA IIC T4EMI/RFI: Complies with EMC Directive 2004/108/EC IP66/IP6Environmental RatingsNormal Operating: -4° to 122° F (-20° to 50° C) Humidity: 10% to 100% non-condensingAlarmsHigh, Low, TWA, STEL, OL (over limit)Audible AlarmsMulti-tone rated at 95 dBA at one foot (30cm)Visual AlarmSix red LEDsVibrating AlarmStandardPumpOptionalDataloggerDatalogger capable of 1 year of continuous data with user configurable intervalsEventloggerCan store up to 30 eventsIQ Management SystemFully compatible. Supports alarm event e-mail, person and location assignment functions. Able to be docked with or without pump attached.BatteryAlkaline: (3) AA Disposable BatteriesRechargeable: Li-Po (Lithium Polymer) battery packBattery Life/ Run TimeAlkaline:         14 hours at 68 to 122°F (20-50°C)Rechargeable: 20 hours at 68 to 122°F (20-50°C)                      18 hours at -4 to 32°F (20-0°C)SensorsO2, %LEL, CO, H2SWarrantyFull 2 year warranty including sensorsUser OptionsConfidence/ compliance beepConfidence flashSet STEL intervalSensor on/offLatching alarmsSafe display modeForce CalibrationAuto-zero on start-upFlip displayCombustible gas measurement (% LEL or % by volume methaneUser-definable calibration gas concentrationForce bumpLanguage choices (5)Custom start-up messageDatalog interval

Honeywell BW  GasAlert Extreme Single Gas DetectorThe GasAlert Extreme is a single gas detector offering real-time readings and extended longevity with a two year field-replaceable battery and sensor.Single gas detection of H2S, CO, O2 SO2, NH3, PH3, CI2, ClO2, NO2, HCN, ETO, O3Direct, real-time readings on large LCD with backlight in low light (auto or demand): in alarm (auto)95 dB tone and bright LED alarmInternal vibrating alarm2-year battery life (typical) with replaceable 3V camera batteryDatalogging is now standard on all GasAlert Extreme detectorsRugged and durable with built-in concussion-proof bootHighly water resistant design with IP66/67 ratingField-settable user options are tamper-proof with passcode protectionLOW, HIGH, STEL (short-term exposure limit) and TWA (time-weighted average) alarmPeak value displayed on command (in ppm or % vol)Visual, audible and vibrating alarmsMulti-language support in English, French, German, Spanish and PortugueseMicroDock II compatible for easy calibration, test and record storageClassified intrinsically safe by UL to US and Canadian standards, ATEX certified: IECEx schemeMeter includes: stainless steel alligator clip test cap and hose, battery and instructions in various languages.GasAlert Extreme Detector ConfigurationsPart NumberMeter ConfigurationResolutionGAXT-H-DLHydrogen sulfide (H2S) with yellow housing0-100 ppmGAXT-H-2-DLHydrogen sulfide (H2S) extended range with yellow housing0-500 ppmGAXT-M-DLCarbon monoxide (CO) with yellow housing0-1000 ppmGAXT-M2-DLCarbon monoxide (CO) H2 resistant with yellow housing0-1000 ppmGAXT-X-DL-2Oxygen (O2) with yellow housing0-30.0%GAXT-S-DLSulfur dioxide (SO2) with yellow housing0-100 ppmGAXT-C-DLChlorine (Cl2) with yellow housing0-50.0 ppmGAXT-Z-DLHydrogen cyanide (HCN) with yellow housing0-30.0 ppmGAXT-D-DLNitrogen dioxide (NO2) with yellow housing0-99.9 ppmGAXT-A-DLAmmonia (NH3) with yellow housing0-100 ppmGAXT-A2-DLAmmonia (NH3) extended range with yellow housing0-400 ppmGAXT-P-DLPhosphine (PH3) with yellow housing0-5.0 ppmGAXT-G-DLOzone (O3) with yellow housing0-1 ppmGAXT-E-DLEthylene oxide (ETO) with yellow housing0-100 ppmGAXT-N-DLNitric oxide (NO) with yellow housing0-250 ppmGAXT-V-DLChlorine dioxide (ClO2) with yellow housing0-1 ppmFor Black housing change the "Y" to "B" GasAlert Extreme Detector AccessoriesGA-TC-1Test cap and hose (1 ft. / 0.3 m)GA24-BALERTConcussion-proof boot with stainless steel alligator-style clipGA-BSPLASH-KSplash guard filters, kit of 5 for use with concussion-proof boot (GA24-BALERT)GA-HC-1Hard hat clip (non-conductive)GA-AG-1Alligator-style clip (non-conductive)GA-NS-1Neck strap with safety releaseGA-LY-1Short strap (6 in. / 15.2 cm)GA-ES-1Extension strap (4 ft. / 1.2 m)GA-USB2IR datalink USB adaptorGA-CH-2Chest harnessSPAK-CC1Hard-sided Carrying Case for motorized sampling pump and/or the detectorGA-SPAKSamplerPak motorized sampling pack kit - SamplerPak arrives ready to use with Sampler motorized pump, coiled connector tubing for detector/pump, sampling tubes with barbed fitting, batteries, sampling probe, manual, multi-language CD manual and a convenient hard-sided carrying case with room for a detector. Note: SamplerPak is not compatible with O3, ETO, ClO2, HCN or Cl2.GA-AS02Manual aspirator pump kit with probe (1 ft. / 0.3 m) MicroDock II Test & Calibration StationsDOCK2-2-1D-00-GMicroDock II automatic test and calibration system base station and GasAlert Extreme docking module (bump only for chlorine dioxide (ClO2) and ozone (O3))DOCK2-0-1D-00-GGasAlert Extreme MicroDock II docking module -Note: Not compatible with chlorine dioxide (ClO2) or ozone (O3) gases.