MEMMERT

Spesifikasi Memmert WATER BATH WB7Stainless Steel Interior Approximate Contents  Approx0.25 ft³ 7Length (A)240 mm 9.4 inWidth (B)210 mm 8.3 inHeight (C)140 mm 5.5 in    Stainless Steel CasingLength (D)468 mm 18.4 inWidth (E)356 mm 9.4 inHeight (with Flat Cover) (F)238 mm 13.3 inHeight (with Gable Cover) (G)337 mm 3.8 inLiquid LevelMinimum Liquid Level (H97 mm 3.8 inMaximum Liquid Level (I)120 mm 4.7 inTemperature DeviationVariation/Distribution±0,1/±0,25 ºCElectrical SupplyVoltage230/115 VFrequency50/60 HzApproximate Electrical Load W/O During Heating1200 W 

Spesifikasi Memmert WATER BATH WNB10The combination of corrosion-resistant stainless steel, precise electronics and multiple temperature protection guarantees the highest level of safety in the laboratoryStainless Steel Interior Approximate Contents  Approx0.35 ft³ 10 LLength (A)350 mm 13.7 inWidth (B)210 mm 8.3 inHeight (C)140 mm 5.5 inStainless Steel CasingLength (D)578 mm 22.7 inWidth (E)356 mm 9.4 inHeight (with Flat Cover) (F)238 mm 13.3 inHeight (with Gable Cover) (G)337 mm 3.8 inLiquid LevelMinimum Liquid Level (H)97 mm 3.8 inMaximum Liquid Level (I)120 mm 4.7 inTemperature DeviationVariation/Distribution±0,1/±0,25 ºCElectrical SupplyVoltage230/115 VFrequency50/60 HzApproximate Electrical Load W/O During Heating1200 W 

Memmert Universal Oven UN30Standard delivery Universal OvenThe universally applicable lab oven U is Memmert’s classic appliance for temperature control in science, research and material tests in industry. The technologically perfected masterpiece made of high-quality, hygienic, easy-to-clean stainless steel leaves nothing to be desired in terms of ventilation and control technology, overtemperature protection and precisely tuned heating technology. SpecificationTemperatureSet temperature range in °Cmin. 5°C above ambient up to +300°CTemperature1 Pt100 sensor DIN class A in 4-wire-circuitControl technologyLanguage settingGerman, English, Spanish, French, Polish, Czech, HungarianControlCOCKPITSingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour displayTimerDigital backwards counter with target time setting, adjustable from 1 minute to 99 daysFunction SetpointWAITthe process time does not start until the set temperature is reachedCalibrationthree freely selectable temperature valuesadjustable parameterstemperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertimeVentilationConvectionnatural convectionFresh airAdmixture of pre-heated fresh air by electronically adjustable air flapVentvent connection with restrictor flapCommunicationDocumentationprogramme stored in case of power failureProgrammingAtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).SafetyTemperature controladjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperatureAutodiagnostic systemfor fault analysisStandard equipmentDoorfully insulated stainless steel door with 2-point locking (compression door lock)Internals1 stainless steel grid(s), electropolishedWorks calibration certificateCalibration at +160°CStainless steel interiorInterioreasy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sidesVolume32 lDimensionsw(A) x h(B) x d(C): 400 x 320 x 250 mmMax. number of internals3Max. loading of chamber60 kgMax. loading per internal20 kgTextured stainless steel casingDimensionsw(D) x h(E) x d(F): 585 x 704 x 434 mm (d +56mm door handle)Housingrear zinc-plated steelElectrical dataVoltage Electrical load230 V, 50/60 Hzapprox. 1600 WVoltage Electrical load115 V, 50/60 Hzapprox. 1600 WAmbient conditionsSet UpThe distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.Altitude of installationmax. 2,000 m above sea levelAmbient temperature+5 °C to +40 °CHumidity rhmax. 80 %, non-condensingOvervoltage categoryIIPollution degree2Packing/shipping dataTransport informationThe appliances must be transported uprightCustoms tariff number8419 8998Country of originFederal Republic of GermanyWEEE-Reg.-No.DE 66812464Dimensions approx incl. cartonw x h x d: 660 x 890 x 650 mmNet weightapprox. 45 kgGross weight cartonapprox. 61 kg 

Memmert Incubator IF160The heating of this incubator is optimally tuned for forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.TemperatureWorking temperature rangemin. 10°C above ambient up to +80°CSetting accuracy temperature0.1 °CTemperature1 Pt100 sensor DIN class A in 4-wire-circuitControl technologyLanguage settingGerman, English, Spanish, French, Polish, Czech, HungarianControlCOCKPITSingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour displayTimerDigital backwards counter with target time setting, adjustable from 1 minute to 99 daysFunction SetpointWAITthe process time does not start until the set temperature is reachedCalibrationthree freely selectable temperature valuesadjustable parameterstemperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertimeVentilationFanforced air circulation by quiet air turbine, adjustable in 10 % stepsFresh airAdmixture of pre-heated fresh air by electronically adjustable air flapVentvent connection with restrictor flapCommunicationDocumentationprogramme stored in case of power failureProgrammingAtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).SafetyTemperature controladjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperatureAutodiagnostic systemfor fault analysisStandard equipmentDoorfully insulated stainless steel door with 2-point locking (compression door lock)Internals2 stainless steel grid(s), electropolishedWorks calibration certificateincl. works calibration certificate for +37°CDoorinner glass doorStainless steel interiorDimensionsw(A) x h(B) x d(C): 560 x 720 x 400 mm (d less 39 mm for fan)Interioreasy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sidesVolume161 lMax. number of internals8Max. loading of chamber210 kgMax. loading per internal20 kgTextured stainless steel casingDimensionsw(D) x h(E) x d(F): 745 x 1104 x 584 mm (d +56mm door handle)Housingrear zinc-plated steelElectrical dataVoltage Electrical load230 V, 50/60 Hz approx. 1600 WVoltage Electrical load115 V, 50/60 Hz approx. 900 WAmbient conditionsSet UpThe distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.Altitude of installationmax. 2,000 m above sea levelAmbient temperature+5 °C to +40 °CHumidity rhmax. 80 %, non-condensingOvervoltage categoryIIPollution degree2Packing/shipping dataTransport informationThe appliances must be transported uprightCustoms tariff number8419 8998Country of originFederal Republic of GermanyWEEE-Reg.-No.DE 66812464Dimensions approx incl. cartonw x h x d: 830 x 1300 x 800 mmNet weightapprox. 96 kg

Memmert Incubator IF110The heating of this incubator is optimally tuned for forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.TemperatureWorking temperature rangemin. 10°C above ambient up to +80°CSetting accuracy temperature0.1 °CTemperature1 Pt100 sensor DIN class A in 4-wire-circuitControl technologyLanguage settingGerman, English, Spanish, French, Polish, Czech, HungarianControlCOCKPITSingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour displayTimerDigital backwards counter with target time setting, adjustable from 1 minute to 99 daysFunction SetpointWAITthe process time does not start until the set temperature is reachedCalibrationthree freely selectable temperature valuesadjustable parameterstemperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertimeVentilationFanforced air circulation by quiet air turbine, adjustable in 10 % stepsFresh airAdmixture of pre-heated fresh air by electronically adjustable air flapVentvent connection with restrictor flapCommunicationDocumentationprogramme stored in case of power failureProgrammingAtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).SafetyTemperature controladjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperatureAutodiagnostic systemfor fault analysisStandard equipmentDoorfully insulated stainless steel door with 2-point locking (compression door lock)Internals2 stainless steel grid(s), electropolishedWorks calibration certificateincl. works calibration certificate for +37°CDoorinner glass doorStainless steel interiorDimensionsw(A) x h(B) x d(C): 560 x 480 x 400 mm (d less 39 mm for fan)Interioreasy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sidesVolume108 lMax. number of internals5Max. loading of chamber175 kgMax. loading per internal20 kgTextured stainless steel casingDimensionsw(D) x h(E) x d(F): 745 x 864 x 584 mm (d +56mm door handle)Housingrear zinc-plated steelElectrical dataVoltage Electrical load230 V, 50/60 Hz approx. 1400 WVoltage Electrical load115 V, 50/60 Hz approx. 900 WAmbient conditionsSet UpThe distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.Altitude of installationmax. 2,000 m above sea levelAmbient temperature+5 °C to +40 °CHumidity rhmax. 80 %, non-condensingOvervoltage categoryIIPollution degree2Packing/shipping dataTransport informationThe appliances must be transported uprightCustoms tariff number8419 8998Country of originFederal Republic of GermanyWEEE-Reg.-No.DE 66812464Dimensions approx incl. cartonw x h x d: 830 x 1050 x 800 mmNet weightapprox. 76 kg

Memmert Incubator IF75The heating of this incubator is optimally tuned for forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.TemperatureWorking temperature rangemin. 10°C above ambient up to +80°CSetting accuracy temperature0.1 °CTemperature1 Pt100 sensor DIN class A in 4-wire-circuitControl technologyLanguage settingGerman, English, Spanish, French, Polish, Czech, HungarianControlCOCKPITSingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour displayTimerDigital backwards counter with target time setting, adjustable from 1 minute to 99 daysFunction SetpointWAITthe process time does not start until the set temperature is reachedCalibrationthree freely selectable temperature valuesadjustable parameterstemperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertimeVentilationFanforced air circulation by quiet air turbine, adjustable in 10 % stepsFresh airAdmixture of pre-heated fresh air by electronically adjustable air flapVentvent connection with restrictor flapCommunicationDocumentationprogramme stored in case of power failureProgrammingAtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).SafetyTemperature controladjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperatureAutodiagnostic systemfor fault analysisStandard equipmentDoorfully insulated stainless steel door with 2-point locking (compression door lock)Internals2 stainless steel grid(s), electropolishedWorks calibration certificateincl. works calibration certificate for +37°CDoorinner glass doorStainless steel interiorDimensionsw(A) x h(B) x d(C): 400 x 560 x 330 mm (d less 39 mm for fan)Interioreasy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sidesVolume74 lMax. number of internals6Max. loading of chamber120 kgMax. loading per internal20 kgTextured stainless steel casingDimensionsw(D) x h(E) x d(F): 585 x 944 x 514 mm (d +56mm door handle)Housingrear zinc-plated steelElectrical dataVoltage Electrical load230 V, 50/60 Hz approx. 1250 WVoltage Electrical load115 V, 50/60 Hz approx. 900 WAmbient conditionsSet UpThe distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.Altitude of installationmax. 2,000 m above sea levelAmbient temperature+5 °C to +40 °CHumidity rhmax. 80 %, non-condensingOvervoltage categoryIIPollution degree2Packing/shipping dataTransport informationThe appliances must be transported uprightCustoms tariff number8419 8998Country of originFederal Republic of GermanyWEEE-Reg.-No.DE 66812464Dimensions approx incl. cartonw x h x d: 730 x 1130 x 670 mmNet weightapprox. 66 kg

Memmert Incubator IF55The heating of this incubator is optimally tuned for forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.TemperatureWorking temperature rangemin. 10°C above ambient up to +80°CSetting accuracy temperature0.1 °CTemperature1 Pt100 sensor DIN class A in 4-wire-circuitControl technologyLanguage settingGerman, English, Spanish, French, Polish, Czech, HungarianControlCOCKPITSingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour displayTimerDigital backwards counter with target time setting, adjustable from 1 minute to 99 daysFunction SetpointWAITthe process time does not start until the set temperature is reachedCalibrationthree freely selectable temperature valuesadjustable parameterstemperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertimeVentilationFanforced air circulation by quiet air turbine, adjustable in 10 % stepsFresh airAdmixture of pre-heated fresh air by electronically adjustable air flapVentvent connection with restrictor flapCommunicationDocumentationprogramme stored in case of power failureProgrammingAtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).SafetyTemperature controladjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperatureAutodiagnostic systemfor fault analysisStandard equipmentDoorfully insulated stainless steel door with 2-point locking (compression door lock)Internals1 stainless steel grid(s), electropolishedWorks calibration certificateincl. works calibration certificate for +37°CDoorinner glass doorStainless steel interiorDimensionsw(A) x h(B) x d(C): 400 x 400 x 330 mm (d less 39 mm for fan)Interioreasy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sidesVolume53 lMax. number of internals4Max. loading of chamber80 kgMax. loading per internal20 kgTextured stainless steel casingDimensionsw(D) x h(E) x d(F): 585 x 784 x 514 mm (d +56mm door handle)Housingrear zinc-plated steelElectrical dataVoltage Electrical load230 V, 50/60 Hz approx. 1000 WVoltage Electrical load115 V, 50/60 Hz approx. 900 WAmbient conditionsSet UpThe distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.Altitude of installationmax. 2,000 m above sea levelAmbient temperature+5 °C to +40 °CHumidity rhmax. 80 %, non-condensingOvervoltage categoryIIPollution degree2Packing/shipping dataTransport informationThe appliances must be transported uprightCustoms tariff number8419 8998Country of originFederal Republic of GermanyWEEE-Reg.-No.DE 66812464Dimensions approx incl. cartonw x h x d: 730 x 950 x 670 mmNet weightapprox. 57 kg 

Memmert Incubator IN160The heating of this incubator is optimally tuned for natural convection and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.TemperatureSet temperature range in °C min. 5°C above ambient up to +80°C Setting accuracy temperature 0.1 °C Temperature 1 Pt100 sensor DIN class A in 4-wire-circuit Control technologyLanguage setting German, English, Spanish, French, Polish, Czech, Hungarian ControlCOCKPIT SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days Function SetpointWAIT the process time does not start until the set temperature is reached Calibration three freely selectable temperature values adjustable parameters temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime VentilationConvection natural convection Fresh air Admixture of pre-heated fresh air by electronically adjustable air flap Vent vent connection with restrictor flap CommunicationDocumentation programme stored in case of power failure Programming AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand). SafetyTemperature control adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature Autodiagnostic system for fault analysis Standard equipmentDoor fully insulated stainless steel door with 2-point locking (compression door lock) Internals 2 stainless steel grid(s), electropolished Works calibration certificate incl. works calibration certificate for +37°C Door inner glass door Stainless steel interiorInterior easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides Volume 161 l Dimensions w(A) x h(B) x d(C): 560 x 720 x 400 mm Max. number of internals 8 Max. loading of chamber 210 kg Max. loading per internal 20 kg Textured stainless steel casingDimensions w(D) x h(E) x d(F): 745 x 1104 x 584 mm (d +56mm door handle) Housing rear zinc-plated steel Electrical dataVoltage Electrical load 230 V, 50/60 Hz approx. 1600 W Voltage Electrical load 115 V, 50/60 Hz approx. 900 W Ambient conditionsSet Up The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm. Altitude of installation max. 2,000 m above sea level Ambient temperature +5 °C to +40 °C Humidity rh max. 80 %, non-condensing Overvoltage category II Pollution degree 2 Packing/shipping dataTransport information The appliances must be transported upright Customs tariff number 8419 8998 Country of origin Federal Republic of Germany WEEE-Reg.-No. DE 66812464 Dimensions approx incl. carton w x h x d: 830 x 1300 x 800 mm Net weight approx. 96 kg Gross weight carton approx. 122 kg

Memmert Incubator IF30The heating of this incubator is optimally tuned for forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.TemperatureWorking temperature rangemin. 10°C above ambient up to +80°CSetting accuracy temperature0.1 °CTemperature1 Pt100 sensor DIN class A in 4-wire-circuitControl technologyLanguage settingGerman, English, Spanish, French, Polish, Czech, HungarianControlCOCKPITSingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour displayTimerDigital backwards counter with target time setting, adjustable from 1 minute to 99 daysFunction SetpointWAITthe process time does not start until the set temperature is reachedCalibrationthree freely selectable temperature valuesadjustable parameterstemperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertimeVentilationFanforced air circulation by quiet air turbine, adjustable in 10 % stepsFresh airAdmixture of pre-heated fresh air by electronically adjustable air flapVentvent connection with restrictor flapCommunicationDocumentationprogramme stored in case of power failureProgrammingAtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).SafetyTemperature controladjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperatureAutodiagnostic systemfor fault analysisStandard equipmentDoorfully insulated stainless steel door with 2-point locking (compression door lock)Internals1 stainless steel grid(s), electropolishedWorks calibration certificateincl. works calibration certificate for +37°CDoorinner glass doorStainless steel interiorDimensionsw(A) x h(B) x d(C): 400 x 320 x 250 mm (d less 39 mm for fan)Interioreasy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sidesVolume32 lMax. number of internals3Max. loading of chamber60 kgMax. loading per internal20 kgTextured stainless steel casingDimensionsw(D) x h(E) x d(F): 585 x 704 x 434 mm (d +56mm door handle)Housingrear zinc-plated steelElectrical dataVoltage Electrical load230 V, 50/60 Hz approx. 1600 WVoltage Electrical load115 V, 50/60 Hz approx. 800 WAmbient conditionsSet UpThe distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.Altitude of installationmax. 2,000 m above sea levelAmbient temperature+5 °C to +40 °CHumidity rhmax. 80 %, non-condensingOvervoltage categoryIIPollution degree2Packing/shipping dataTransport informationThe appliances must be transported uprightCustoms tariff number8419 8998Country of originFederal Republic of GermanyWEEE-Reg.-No.DE 66812464Dimensions approx incl. cartonw x h x d: 660 x 890 x 650 mmNet weightapprox. 48 kgGross weight cartonapprox. 64 kg

Memmert Incubator IN110The heating of this incubator is optimally tuned for natural convection and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.TemperatureSet temperature range in °Cmin. 5°C above ambient up to +80°CSetting accuracy temperature0.1 °CTemperature1 Pt100 sensor DIN class A in 4-wire-circuitControl technologyLanguage settingGerman, English, Spanish, French, Polish, Czech, HungarianControlCOCKPITSingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour displayTimerDigital backwards counter with target time setting, adjustable from 1 minute to 99 daysFunction SetpointWAITthe process time does not start until the set temperature is reachedCalibrationthree freely selectable temperature valuesadjustable parameterstemperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertimeVentilationConvectionnatural convectionFresh airAdmixture of pre-heated fresh air by electronically adjustable air flapVentvent connection with restrictor flapCommunicationDocumentationprogramme stored in case of power failureProgrammingAtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).SafetyTemperature controladjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperatureAutodiagnostic systemfor fault analysisStandard equipmentDoorfully insulated stainless steel door with 2-point locking (compression door lock)Internals2 stainless steel grid(s), electropolishedWorks calibration certificateincl. works calibration certificate for +37°CDoorinner glass doorStainless steel interiorInterioreasy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sidesVolume108 lDimensionsw(A) x h(B) x d(C): 560 x 480 x 400 mmMax. number of internals5Max. loading of chamber175 kgMax. loading per internal20 kgTextured stainless steel casingDimensionsw(D) x h(E) x d(F): 745 x 864 x 584 mm (d +56mm door handle)Housingrear zinc-plated steelElectrical dataVoltage Electrical load230 V, 50/60 Hz approx. 1400 WVoltage Electrical load115 V, 50/60 Hz approx. 900 WAmbient conditionsSet UpThe distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.Altitude of installationmax. 2,000 m above sea levelAmbient temperature+5 °C to +40 °CHumidity rhmax. 80 %, non-condensingOvervoltage categoryIIPollution degree2Packing/shipping dataTransport informationThe appliances must be transported uprightCustoms tariff number8419 8998Country of originFederal Republic of GermanyWEEE-Reg.-No.DE 66812464Dimensions approx incl. cartonw x h x d: 830 x 1050 x 800 mmNet weightapprox. 76 kg