NDT Product

Product Details :

Tinker Rasor Model: PD-5 ACCESSORY To Model Mark V

Model: PD-5 Audio Frequency Oscillator

Pipe & Cable Locator'"Fits into the Mark V "Ranger" case

Features

• 2.5- 100 volt output

• 6 position output voltage selector

• Compatible with all "Mark" receivers (Mark II, III, IV, V)

• Pulse "Identifying" signal

• Battery charging circuit built-in

• LED impedance meter

Instrument Includes:

• 12v input cables w/clamps

• Pipe connection cable w/ clamp (Red)

• Ground connection cable w/ clamp (Black)

• Instructions Manual

Environment

• 0ºC to 50ºC (32ºF to 122ºF)

Specifications

• 12v power supply required

• Power from Mark V "Ranger"

• Power using optional rechargeable batteries

• 759 c.p.s. signal

• Min output 2v

• Max output 100v

Dimensions

• Use - 5" x 5.5" x 2.5" weight 1.5 lbs. (127mm x 139.7mm x 63.5mm weight 0.68 kg)

• Shipping - 13" x 9" x 7" weight 3 lbs. (330mm x 228mm x 177.8mm weight 1.36 kg)

Applications

• Pipe & Cable Locating

• Short Locating

• Holiday (Pearson Method) Locating

Voltmeter

Product Details :

Tinker Rasor Model CPV-4 Digital VOLTMETER

Features

• Hand Held Instrument

• LCD digit display

• 20 Meg Ohm Impedance

• Filter AC Interference

• Heavy Duty Coiled Leads with Clamps

• Works with T&R Reference Electrodes: 6A,6B, 8A, 8B

• Storage Case

Included

• Instrument

• (1) 9 Volt Battery

• Leads with Clamps

• Come with (1) 6-A Reference Electrode or your choice (See Electrodes Page)

• Case with Foam Insert

• Instructions Manual

Construction

• Durable die-cast aluminum case

• Powder coated finish

• Integrated circuits

Applications

• CP Potentials

• Structure to Earth

• Structure to Structure

Calibration

• Recommended Annually

Environment

• 0-90o C / 0-194o F

Dimensions

• 4-5/8" x 3-5/8" x 2-3/16"

Parts & Accessories

• #085-086 CPV-4 Instrument

• #026-028 Cable Assembly (1Blk-1Red) 

• #029-130 Storage Case 

• #085-078 6A Half Cell Electrode 

• #177-056 Extension Handle (6 Series Half Cells)

• #177-057 Extension Handle (2A Half Cell) 

Voltmeter

Product Details :

Tinker Rasor Model VC-2 “THE VERIFIER”

Verifies Accuracy of Voltmeters

Features

• Portable, battery operated

• Highly accurate DC output

• Verify any DC Voltmeter

• Battery test LED

• Works with T&R

​

1. CPV-2 Voltmeter

2. CPV-4 Voltmeter

Included

• Instrument

• (6) AA Batteries

• Instructions Manual

Applications

• Verify voltmeter readings

Calibration

• Recommended Annually

Dimensions

• 6.25" x 4" x 2.5", 1.5 lbs. (158mm x101mm x 63mm, 0.7kg)

Shipping Dimensions

• 4.5" x 4.5" x 5.75", 3 lbs. (114.3mm x 114.3mm x 146mm, 1.4kg

Environment

• -10ºC to 50ºC (14ºF to 122ºF)

Specifications

Outputs:

• 0.001V    (+/- 1 mv)

• 0.01vV    (+/- 1 mv)

• 0.1V         (+/- 1 mv)

• 1.0V        (+/-5 mv)

• 2.5V        (+/-5 mv)

• 5.0v        (+/-5 mv)

​

• (6) "AA" Cell Alkaline Batteries

Voltmeter

Product Details :

Tinker Rasor Model: BP-1 PROBE Bumper Probe"

Features

• Rugged Construction

• Water Resistant

• Unaffected by Surface Cover

• Easy to Install

• Zinc Plated Clamp (included in kit)

Instrument Includes:

• BP-1: 25' cable to reach passenger area: Does not come with vehicle clamp

• BP-1C: 25' cable to reach passenger area:  Kit comes compete with vehicle clamp

Applications

•  Pipeline Locates

• Centerline of Pipes

• Pipeline Depth

• Electrical Contacts

• Pipelines Isolators

Recommendations

• Use on truck

• Right of way vehicle

• Other vehicles

• Receiver sits in passenger area

Specifications

• Works with Model PD

• Works with Model V "Ranger"

Environment

• 20ºC to 55ºC (-4ºF to 131ºF)

Dimensions

• Probe: 1" x 9.75"  (25mm x 235mm))

• Shipping  Bp-1: 13" x 9.5" x 5" 4 lbs. (330mm x 241mm x 127mm 1.81kg)

• Shipping BP-1 (C): 13" x 9" x 7" 6 lbs. (330mm x 228mm x 178mm 2.72kg)

Parts List:

• #085-084 Vehicle Clamp

Voltmeter

Product Details :

Tinker Rasor Model ACT Amp Clamp Tester

The ACT is the ultimate amp clamp companion. Newly designed, the ACT is very accurate and an easy to use verifying device. Using the ACT, your amp clamp or multimeter is fed 1.0 Amp or 0.5 Amp DC, quickly verifying your reading. The Tester’s accuracy exceeds most amp clamp accuracy, with a ±5% accuracy. The Tester features a built-in rechargeable battery, two banana jacks for the current loop for testing amp clamps, or connecting a multimeter. Use the ACT on all popular current meters and amp clamps.

Features

• Very accurate DC current

• 1.0 Amp and 0.5 Amp output

• Use with any amp clamp

• Easy to use with most currrent meters

• Use in the Field or Lab

• Calibration Certification

Includes:

• Instrument

• Rechargeable Battery (installed)

• Battery charger

• Instructions Manual

Applications

• Check Accuracy of current meters

• Easy to use

• Calibrated

• Use with multimeters

• Use in the Field

Calibration

The Model ACT comes with calibration certification and a calibration sticker on the panel of the instrument showing calibration date and due date.

Clamp Meter

Product Details :

Tinker Rasor Model CE-IT  Below Ground Insulator Tester

Features

• Gives test results via digital display

• Results given

  • Effectiveness of Buried Pipe Insulators

  • Isolation condition of pipelines in road crossing casings

• Good to indicate broken wire

• Automatic off to ensure long battery life

Included

• Instrument

• (6) AA Batteries

• Connector with leads and clamps

• Instructions Manual

CE-IT Capabilities

• Senses & Replicates:External polarity, External Voltage,

• Analogues,Internal Voltage Reference with External Voltage

• Measures flowing current throughout the testing cycle

• Gives result of test considering the above tested parameters

• Battery life exceeds 50 hours  

Applications

• Below Ground Insulators

• Use successfully as a casing short investigative tool

• Use Regardless of CP or other current/voltage present or structure

Specifications

• Battery Operated

• (6) Alkaline "AA" batteries (replaceable)

• Cables and probes included

Dimensions

• 8" x 4"  x 3", 2 lbs. (203mm x 101.6mm x 76.2mm, 0.907kg)

Parts & Accessories

• #085-114 CE-IT Instrument 

• #026--050 Cable Connector Assembly

• #010-002 Battery, AA Cells Each CE-IT Takes Six Each

Insulation Tester

Product Details :

Tinker Rasor Model CS-10 PORTABLE CURRENT SUPPLY

Portable Current Supply 10 AMP output For Cathodic Protection Testing

Features

• Adjustable DC Output from 0 to 10 Amps

• Input 15v DC Max

• Continuous ot interrupted output

• LCD display of output, 1MA resolution

• Portable

• Lightweight (6 lbs. 2.72kg)

• MIL-SPEC case

Included

• Instrument

• 12v Rechargeable Li Battery

• 9v Replaceable Battery

• (1) Set of Cables, structure/ground

• (1) Set of Cables, 12v DC Power

• Battery Charger

• Instructions Manual

Applications

• CP Current Requirements

• CP Maintenance Tests

• Locating Shorts and Contacts

• Casing Shorts

• Insulator Testing & Locating 

Specifications

• Output Range: 1Amp, 10 Amp

• Continuous Operation

• Interrupter Timing Positions (in seconds);

​

1. Continuous

2. 0.2 off - 0.8 on

3. 0.3 off - 0.7 on

4. 1 off - 4 on

5. 2 off - 8 on

6. 6 off - 14 on

Environment

• 0ºC to 50ºC (32ºF to 122ºF)

Use Dimensions

• 5.75" x 12.25" x 10", 6 lbs. (146mm x 311mm x 254mm, 2.72kg)

Shipping Dimensions

• 14" x 12" x 6", 8 lbs. (355.6mm x 304.8mm x 15.24mm, 3.63kg) 

Parts & Accessories

• #085-119 CS-10 Instrument 

• #026-009 Cable, Battery,PD 

• #010-037 Battery, Rechargeable 

• #031-025 Battery Charger 

• #010-007 Battery, 9 Volt 

Note:
the Model CS-10 ships with the 31-025 charger which includes a power cord for use in North America. In other regions of the world, an adapter may be required. Users may also find a local source for a replacement power cord. This is a standard cord in use throughout the world. IEC 320 C7 Non Polarized connector.

Parts for Older Versions of CS-10, prior to serial 3310:

• #010-029 Battery, Rechargeable 

• #031-015 Battery Charger 

Insulation Tester

Product Details :

Tinker Rasor Model  RF-IT  Above Ground Insulator Tester / RF-IT

Features

• Hand Held Instrument

• Easily locates shorted bolts, replaces bolt to bolt

• Use on structure with or without CP

• Uses Radio Frequency to test effectiveness of above ground insulators

• Auto Shut-Off feature

Includes

• Probe, Red with lead wire and needle point tip

• Probe, Black with needle point tip

• Additional needle tips, stored in small black vinyl tubes

• (6) AA Batteries

• Instructions Manual

• Warranty Card

The Model RF-IT is a highly sensitive device used to test above ground pipeline insulators. This affordable unit is also fantastic for flange bolts shorts. The automatic RF-IT allows the operator to pinpoint the precise contact point. The RF-IT emits an audible beep. When the operator gets closer to the point of contact the unit starts beeping faster. At the same time, the sliding scale LCD meter moves from right to left.

Applications

• Above Ground Insulators

• Pinpoints The Precise Contact Point

• Use Regardless of CP or Other Current / Voltage Present on Structure

Use

Test above ground pipeline insulators to pinpoint the precise contact point. The RF-IT emits an audible beep. When the operator gets closer to the point of contact the unit starts beeping faster. At the same time, the LCD meter moves from left to right.

Specifications

• Battery Operated

• (6) Alkaline "AA" batteries (replaceable)

• Cables and probes included

Dimensions

• Operating: 8" x 4" x 3", 2 lbs. (203mm x 101.6mm xc 76.2mm, 0.907kg)

Parts List

• #085-113 RF-IT Instrument 

• #005-150 Assembly Probe Red w/Wire Lead 

• #005-151 Assembly Probe Black  

• #118-048 Tip Needle Point 

• #010-002 Battery, "AA" Cell  Each RF-IT Takes Six AA's Each

Insulation Tester

Product Details :

Model: SB-1, SB-2,  Soilboxes

SB-1 Conforms to ASTM G57

SB-2 Conforms to AASHTO T-288

SB-1 

SB-2 

SB-1 Features

• (4) Brass Pins

• (2) Banana Plug Leads, Red

• (2) Banana Plug Leads, Black

SB-1 Includes

• SB-1 Soilbox

• Cables with banana plug leads

SB-2 Features

• (2) Stainless Steel plates

• (2) Stainless Steel connectors

SB-2 Includes

• SB-2 Soilbox

• Cable set with clamps

Applications

• Wenner 4 Pin Method

• Pin "Fall of Potential" Method

• 2 Pin Method

• Geological Studies

• Archeological Studies

Uses

• Soil Resistivity Instruments

Parts

• #026-068 SB-2 Leads 

• #026-073 SB-1 Leads 

SR-2 Soil Resitivity Meter 

Available Accessories

• #073-083 Soil Pin: 3/16"x 18" Stainless Steel 

• #026-094 Reel & Cable  Dual reel wiring system offers a maximum pin spacing, with respect to a 4-pin linear array (Wenner methodology), of 120 ft (approx. 40 meters). Both reels are positioned at the center of the linear array, as opposed to at one end, and each reel has a 180 ft long wire and a 60 ft long wire.

Sample Splitter

Product Details :

Tinker Rasor Model 505 “GO-FER” PIPE AND CABLE LOCATOR

Radio Frequency Transmitter / Receiver

Features

• Quartz Radio Frequency

• Inductive or Conductive Operation

• On handle finds unknown structures

• 3 Step sensitivity gain

• Very accurate depth location (Triangulation)

• Quartz controlled signal

• Volume control, independent of sensitivity

• Battery operated (12) "C"  (Rechargeable)

Includes

• (1) Transmitter

• (1) Receiver

• (1) Ground Plate

• (1) Conductive Connection Cable

• (12) "C" Cell Batteries

• Instruction Manual

Note: The Model 505 is a split box locator. Both receiver and transmitter require a separate battery pack.

Applications

•  Pipe Locating

• Cable Locating

• Depth Determination

• Coated or Non-Coated Pipes

• Right of Way Searches

• Unknown Structures

• Close Interval Survey, Pipeline
  Centering

Specifications

Transmitter:

• Radio Frequency, 83 khz

• Audio Frequency – 324.22 Hz.

• Headset Impedance – 8 ohms.

• 3 Watt, Peak

Environment

• 0ºC to 50ºC (32ºF to 122ºF)

Dimensions

• Transmitter: 11.375" x 8.5" x 3", 3 lbs. (289mm x 216mm x 76mm, 1.36kg)

• Receiver: 11.375" x 8.5" x 3", 4 lbs. ( 289mm x 216mm x 76mm, 1.81 kg)

Parts List

• Model 501-C Induction Clamp 

Accessories Sold Separately

• #105-013 Headphones, Stereo 

• #074-047 3 Section Handle 

• #029-018 Complete Carrying Case 

• Model TS-8 Handheld Probe 

• (2) Li Batteries with (2)chargers 

Note: The Model 505 is a split box locator. Both receiver and transmitter require a separate battery pack.

Alat Tester Kabel