Amprobe AT-6020 Advanced Wire Tracer Kit
- Combines a receiver and powerful transmitter to locate energized and de-energized wires, breakers, and fuses
- Detects the signal in wires
- Works on Energized and De-energized circuits up to 600 V AC/DC
- Features high signal, low signal, and loop modes
Manufacturer Specs
| Amprobe AT-6000 Series Specifications |
|
| Display size | LCD 2.5 in (6.35 cm) | LEDs | - |
| Display dimensions (W x H) | 1.45 x 1.93 in (36.72 x 48.96 mm) | - | - |
| Display resolution | 240(RGB) x 320 pixels | - | - |
| Display type | TFT-LCD (262 K) | LEDs | - |
| Display color | True, 16bit/color | Operating mode LEDs: red
Battery status LEDs: green, yellow, red | - |
| Booting time | < 3 sec | < 2 sec | - |
| Backlight | • | - | - |
| Operating temperature | 45%: -4 °F to <50 °F (-20 °C to <10 °C)
95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to 122 °F (40 °C to 50 °C) | 95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to <122 °F (40 °C to <50 °C) |
| Storage temperature and humidity | -4 °F to 158 °F (-20 °C to 70 °C), <95% RH |
| Operating altitude | 0 to 6561 ft (2000 m) |
| Transient protection | - | 6.00 kV (1.2/50μS surge) | - |
| Pollution degree | 2 |
| IP rating | IP 52 | IP 40 |
| Drop test | 3.28 ft (1 m) |
| Power supply | 4 x AA (alkaline or NiMH rechargeable) | 8 x AA (alkaline or NiMH rechargeable) | - |
| Power consumption (typical) | 110mA | Hi/Lo mode: 70 mA
Loop mode with Clamp: 90 mA Consumption
without signal transmission: 10 mA | - |
| Battery life | Approx. 16h | Hi/Lo mode: approx. 25h
Loop mode: approx. 18h | - |
| Low Battery Indicator | • | • | - |
| Fuse | - | 1.6 A, 700 V, fast-acting, Ø 6x32mm | - |
| Maximum conductor size | - | - | 1.26 in (32 mm) |
| Dimensions (L x W x H) | Approx. 7.2 x 2.95 x 1.69 in
(183 x 75 x 43 mm) | Approx. 7.2 x 3.66 x 1.97 in
(183 x 93 x 50 mm) | Approx. 5.9 x 2.75 x 1.18 in
(150 x 70 x 30 mm) |
| Weight | Approx. 1.25 lb (0.57 kg) | Approx. 6.18 lb (2.8 kg) | Approx. 0.25 lb (0.114 kg) |
| | |
Main Applications- Trace Energized and De-energized wires
- Identify breakers and fuses
- Non-contact voltage mode and passive tracing
| Special Applications- GFCI-protected circuit wire tracing
- Find breaks, openings, and shorts
- Trace wires in metal conduit
- Trace non-metallic pipes and conduits
- Trace shielded wires
- Trace underground wires
- Trace low voltage wires and data cables
| - Sort bundled wires
- Map circuits using test leads connection
- Trace breakers on system with light dimmers
- CT-400 signal clamp (AT-6030 kit) to improve accuracy and performance when there is no access to bare conductors
|
In The Box
- AT-6000-R Receiver
- AT-6000-T Transmitter
- TL-6000 Test Lead and Accessory Kit
- CC-6000 Hard Carrying Case
- User Manual
- 12 - 1.5 V AA (IEC R6) Batteries