phone Phone

CV. Andalan Prima Sejahtera

Extech PRT200 Non-Contact Phase Sequence Tester
Hover to Zoom

Sell Extech PRT200 Non-Contact Phase Sequence Tester

Specification of Extech PRT200 Non-Contact Phase Sequence Tester

  • 75 to 1000VAC input voltage with 45 to 65Hz frequency range
  • LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
  • Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
  • Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement
  • Adjustable Hi/Lo LED brightness switch for making measurements in dimly lit areas or sunlight
  • Fully insulated alligator clips with wide jaws
  • Low battery warning
  • Complete with three built-in 30" test leads with large color-coded alligator clips, four AA batteries, and pouch case

Manufacturer Specs

Measurement PrincipleStatic induction
Input Voltage75 to 1000VAC
Frequency Range45 to 65Hz
Max conductor diameter33mm (1.3”)
Probe length86cm (34”)
Auto-Off5 min. without sequence detection
Low Battery WarningPower LED flashes
Batteries4 x 1.5V AA
Current consumption15mA
Operating Temperature & Humidity-10°C to 50°C (14°F to 122°F) Max. 80% R.H.
Storage temperature & Humidity-20°C to 60° (-4°F to 140°F) Max. 80% R.H.
SafetyThis meter is intended for origin of installation use and protected, against the users, by double insulation per EN61010-1 to Category IV 600V and Category III 1000V; Pollution Degree 2.

Tech Specs

Phase / Motor / Transformer Testing/Phase and Rotation Meters Template

Maximum Frequency Range65 Hz (0.000065 Mhz)
PhasesSingle phase
Measure VoltageYes
Maximum Voltage1000 V
Type (Phasing Sequence)Portable

Untuk keterangan lebih lanjut, silahkan download PDF ini :