Fluke 115 True-RMS AC/DC Digital Multimeter

Rp. 100

Last Updated

25 Jan 2023

Country Origin

Singapore

Minimum Order

1 Unit

Specification of Fluke 115 True-RMS AC/DC Digital Multimeter

Fluke 115 Field Service Technicians Multimeter

Fluke 115 True-RMS AC/DC Digital Multimeter
Resistance, continuity, frequency, capacitance, and diode test
Measures 20 A (30 seconds momentary; 10 A continuous)
Large white LED backlight to work in poorly lit areas
Compact ergonomic design for one-handed operation
Compatible with optional magnetic hanger (ToolPak)
True-rms for accurate measurements on non-linear loads
Min/Max/Average with elapsed time to record signal fluctuations
CAT III 600 V safety rated
True RMS
.5% Accuracy
28% larger digits
6000 counts
Bargraph
Backlight
Min-max recording

A Compact true-rms meter ideal for field service technicians. The Fluke 115 is the solution for a wide variety of electrical and electronic testing applications. This true-rms meter provides easy one-handed operation in a compact package.

Specs

Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 95 %.

The accuracy specifications take the form of: ± ( [ % of Reading ] + [ Counts ] )

Maximum voltage between any terminal and earth ground 600 V

Surge protection 6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2

Display Digital: 6,000 counts, updates 4/sec

Bar graph 33 segments, updates 32/sec

Operating temperature -10 °C to + 50 °C

Storage temperature -40 °C to + 60 °C

Battery 9 volt Alkaline, NEDA 1604A/IEC 6LR61

Battery life 400 hours typical, without backlight

Measurement	Range	Resolution	Accuracy ± ([% of reading] + [counts])
DC millivolts	600.0 mV	0.1 mV	2.0 % + 3
DC volts	6.000 V	0.001 V
	60.00 V	0.01 V
	600.0 V	0.1 V
Auto volts	600.0 V	0.1 V	2.0 % + 3 (dc, 45 Hz to 500 Hz) 4.0 % + 3 (500 Hz to 1 kHz)
AC millivolts1 true-rms	600.0 mV	0.1 mV	1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
AC volts1 true-rms	6.000 V	0.001 V	1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
	60.00 V	0.01 V
	600.0 V	0.1 V
Continuity	600 Ω	1 Ω	Beeper on < 20 Ω, off> 250Ω; detects opens or shorts of 500 µs or longer.
Ohms	600.0 Ω	0.1 Ω	0.9 % + 2
	6.000 kΩ	0.001 kΩ	0.9 % + 1
	60.00 kΩ	0.01 kΩ
	600.0 kΩ	0.1 kΩ
	6.000 MΩ	0.001 MΩ
	40.00 MΩ	0.01 MΩ	1.5 % + 2
Diode test	2.000 V	0.001 V	0.9 % + 2
Capacitance	1000 nF	1 nF	1.9 % + 2
	10.00 µF	0.01 µF
	100.0 µF	0.1 µF
	9999 µF	1 µF
	100 µF to 1000 µF		1.9 % + 2
	> 1000 µF		5 % + 20
Lo-Z capacitance	1 nF to 500 µF		10 % + 2 typical
AC amps true-rms (45 Hz to 500 Hz)	6.000 A	0.001 A	1.5 % + 3
	10.00 A	0.01 A	1.5 % + 3
	20 A continuous overload for 30 seconds max.
DC amps	6.000 A	0.001 A	1.0 % + 3
	10.00 A	0.01 A	1.0 % + 3
	20 A continuous overload for 30 seconds max.
Hz (V or A input) 2	99.99 Hz	0.01 Hz	0.1 % + 2
	999.9 Hz	0.1 Hz
	9.999 kHz	0.001 kHz
	50.00 kHz	0.01 kHz