Test Method
Accelerated Laboratory and Field Procedure for the determination of corrosion of iron, in the presence of water, on samples such as gasoline and gasoline blended with 10% ethanol, E10 (Specification D4814); gasolineblend components (except butane); diesel fuel and biodiesel B5, except Grade No. 4-D (Specification D975); biodiesel B6 to B20 (Specification D7467); diesel-blend component such as light cycle-oil; No.1 fuel oil, No.2 fuel oil (Specification D396); aviation turbine fuel (Specification D1655).
Specification
Conforms to the specifications of: ASTM D7548
Temperature Setting: 37.8°C (100°F)
Bath Tank Volume: 1.3 Gallons
Heating/Cooling: Peltier Regulating System
Stirring Speed: 100 RPM; 900 RPM
Features
- Preset Temperature and RPM value in direct accordance with ASTM D7548
- 5” Touch Screen Control Display with Soft keys
- 4-position liquid bath
- Integrated Timer
- Small Footprint
Included Accessories
- 5ml Syringe with 63.5mm (2.5 in) needle
- Temperature Probe (4)
- Test Jar, 90 ml capacity, flat-bottom (4)
- Test Jar Cap (4)
- Corrosion Test Specimen Assembly (4)
- Port Cover (4)
- Ethernet Crossover Cable (1)
- O-Ring (4)
- Magnetic Stirrer Bar according to ASTM (5)
- 2x Lighted Magnifying Lens (1)
Electrical Requirements
115V 60Hz
220-240V 50/60Hz
Additional Accessories
- 250-000-28F ASTM 28F Thermometer, Range: 97.5 to 102.5°F
- 250-000-28C ASTM 28C Thermometer, Range: 36.6 to 39.4°C
- K30130 Polishing Chuck
- K30150 Drive Motor, 115V
- K30180 Drive Motor, 230V
- 380-100-002 Silicone Carbide Abrasive Cloth Roll, C-100 grit Open Mesh, 38mm width x 22.5m length. For Preliminary grinding and final polishing of test specimens.