CV. Andalan Prima Sejahtera

sql
S-Flow 870 Omnitek S-Flow Automatic Houillon Viscometry System
Hover to Zoom

31 Oct 2019
United States
1 unit
IDR CALL

Specification of

Specification

 

Conforms to the specifications of: 

ASTM D7279, D2270

    Correlates to ASTM D445

Measuring Range: 0.3 - 3,000 mm2/s (cSt) @ 40 °C

Temperature Range: 20 to 120 °C (68 - 248 °F) (*For temperatures around ambient, and external chiller is required)    

Temperature Stability: Better than ±0.02 °C

Timer Accuracy: 0.001 s

Sample Volume: 0.3 - 1.0 mL

Solvent Consumption: 2 - 3 mL per cycle

Sample throughput: Up to 80 samples per hour per bath (under optimal conditions)

Viscometer Type: Houillon

Sensor Type: Optical

Communication: RS232

PC Control: Multiple instruments can be controlled with one PC

Data Export: USB

 

Description

The Omnitek S-flow range of instruments consists of compact, bench-top automated viscometry systems for the analysis of used and new lubricants. It is also the ideal system for used oil analysis laboratories that need to test a wide range of lubricant viscosities. Additionally, S-flow systems are used for analysis of fuels like diesel, bunker fuel and bio-fuel (feedstock), hydraulic and metal working fluids and even gelatins and inks. 

Features

  • Applicable for fuels, base oils, formulated oils, and petroleum products as well as water-based fluids
  • Compliant with requirements for ASTM D7279, ASTM D2240, and correlation to ASTM D445
  • High throughput: up to 80 samples per hour per bath under ideal operating conditions
  • Very easy to use and maintain
  • Small sample volume: 0.3 - 1.0 mL
  • Low solvent consumption: 2 - 3 mL per sample
  • Extremely accurate temperature control and flow-time measurement independent of fluid type
  • Automatic flow time measurement with ultraprecise meniscus detection
  • Fully automatic cleaning and drying (model dependent)
  • Fast and easy tube replacement (tubes are not connected to optical sensors)
  • No need to drain bath during tube replacement
  • Single or dual solvent injection (model dependent)
  • Integrated Cleaning Pump
  • Integrated VI calculations (on 3500 model only)
  • Stand-alone unit. No PC required. Software operation is available as an option
  • Chemically resistant to allow for all common solvents
  • Optional duplo measurement capability
  • Integrated back flushing
  • Optional software available

Test Method

The kinematic viscosity characterizes flow behavior. This method covers the measurement of kinematic viscosity of transparent and opaque liquids; such as base oils, formulated oils, diesel oil, biodiesel blends, residual fuel oils, marine fuels, and used lubricating oils using an automated Houillon viscometer. 

Electrical Requirements

115V 60Hz
230V 50Hz

Included Accessories

  • Viscometer Tube(s)
  • Starter Kit
  • Backflush Kit
  • Calibration Standards

Additional Accessories

  • Dual Solvent Cleaning
  • Cooling Coil and Circulator (for measurement around room temperature)
  • Compressor
  • PC for Instrument Control
  • Robotic Operation
  • EasyFlow or Duplo Viscometer Tubes
  • Positive-Displacement pipette
  • Software

 

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Telepon
Request a Quote
Produk Siap di Pesan
Rp 0
1
Bendera Indonesia Indonesia  |  Bendera Inggris English
Ingin menghubungi kami?
Klik tombol dibawah
Logo IDT
Chatbot