Specification of Thermal Imaging Camera Attachment - FLIR One Pro Android USB C KIT
FLIR One Pro Android USB C KIT - Thermal Imaging Camera Attachment
FLIR ONE Pro Android USB C One Pro Thermal Imaging Phone Accessory for Android 160x120 USB-C Connector, FLIR VP50 Vibrating NCV with Flashlight, FLIR MR40 Moisture Meter Pen
FLIR ONE Pro Android USB C General Specification
Certifications MFi (iOS version), RoHS, CE/FCC, CEC-BC, EN61233
Operating temperature 0 °C – 35 °C, battery charging 0 °C – 30 °C
Non-operating temperature -20 °C – 60 °C
Size 68mmW x34mm H x14mm D
Weight 36.5g
Mechanical shock Drop from 1.8m
Video
Thermal and visual cameras with MSX
Thermal sensor Pixel size 12µm, 8 – 14µm spectral range
Thermal resolution 160x120
Visual resolution 1440x1080
HFOV / VFOV 55° ± 1° / 43° ± 1° (Pro)
FLIR VP50 Specifications
Voltage Ranges 90 to 1000V
24 to 1000V
Category Rating CAT IV-1000V
Frequency Range 45 - 65Hz
Built-in Flashlight Yes
Vibrating Indication Yes
On/Off Switch Yes
Warranty Limited Lifetime*
FLIR MR40 General Specifications
Measurement
Measurement Range 5% to 60% MC (Moisture Content)
Measurement Accuracy 5 to 30% MC (Moisture Content): +/- 2%
30 to 60% MC (Moisture Content): Reference only
Note: For materials other than Group 9/Building Materials: plywood, drywall, and oriented strand board (OSB)
Audible Indication 5 to 12%: Low Beep rate. 13 to 60%: Higher beep rate. More than 60%: Highest Beep rate (Display OL) Calibration/ Pin Check, Integrated in Cap 16%
General Information
Flashlight ~40 lumens
Display LCD
Electrode pins Integrated, Replaceable (4 pins included)
Measurement Principle Electrical Resistance
Warranty Limited lifetime
Calibration cycle N/A
Battery type 2 × AAA alkaline batteries (included)
Battery life 70 Hrs W/O Flashlight
Battery status indicator 4 Bar battery icon
Auto Power Off (APO) 3 minutes
Drop test 3 m (9.8 ft.)
IP Rating IP54 Splash Proof
Operating temperature -10 to 60°C (14 to 140°F)
Weight 80g (2.8 oz) with batteries
Dimensions (H × W × L) 193 x 26 x 31 mm (7.6” x 1.0” x 1.2”)
Material PC-ABS w/TPE Overmold